Jewel Movements
Written by James Matthews
We all hear about Luxury Watches that have Jewel Movements however what does this mean? JewelersLounge – Luxury Watch Blog investigates and it is quite interesting.
The jewel movement involves the use of jewels within the men’s watches to act as bearings at the wheel train as well as around the escapement lever. These are areas within a watch component where wear and tear is the most prominent.
Tiny synthetic gem crystals are set between many of the gears, in order to reduce friction. These gems resist temperature better than metal, and hold lubricant much longer.
Originally, the natural rubies were used before a major switch to industrial-grade or synthetic rubies for cost efficiency reason. There are two important points about rubies that make them suitable to be used as bearings.
Firstly they are extremely hard (it can be as hard as diamonds) to withstand high frequency of abrasion and wearing. Secondly, its smooth surface is perfect for the various steel components in the watch to operate on with much reduced friction.
With the high load and high speed motions within watches, the two advantages of ruby clearly outweigh any possibility of using steel bushings.
You can actually hear the jewel movement working. The ticking noise of mechanical watches are actually made by two rubies banging into the steel teeth of the escape wheel. You should make sure to have your watch serviced every five years, as the toughness of the rubies can erode the steel if not properly looked after.
Movado Watches have jewel movements and depending on the model some have 17 and others 25.
There are many categories of jewel movement, for example, 17 jewels, 21 jewels, or 25 jewels. The actual meaning of these numbers is just a representation on the number of rubies used within the mens watches.
Does it mean that having a 21 jewel movement would equate to better quality than a 17 jewel movement?
Well, not really. The higher numbers reflects more jewels used for the parts to prevent more specific wearing. Or watches with more moving mechanical components would require additional rubies to be fitted in to reduce friction in these areas.
A simple example would be automatic watches that use only 4 – 8 more jewels to provide low friction assistance of the rotors for winding of the mainspring.
In other words, more jewels indicate a more complicated movement, which is why many watch enthusiasts are wiling to pay over the odds for them. Also, the more jewels used, the less wear there is on the watch parts.
But it does not necessarily mean better quality watch is being produced. Some watch enthusiasts would not be able to appreciate ridiculously high number jewels if the mechanisms of these mens watches do not require it.
In fact, these rubies are worth about $0.02 each. There is hardly any nominal value attached. Importantly, it is how the rubies are used based on the watch design and components to bring out its best in performance and reliability.
Related posts
This post was written by James Matthews. If you have any questions or comments you may contact him at james@jewelerslounge.com
